Chicago Pneumatic SCD 450 Operating Instructions Manual Download Page 5 | Manualshive

Page: 5 / 24

Chicago Pneumatic SCD 450 Operating Instructions Manual Download Page 5

Introduction

Thank you for choosing Chicago Pneumatic brand products. For over a century, the
Chicago Pneumatic brand has represented performance and innovation in the
pneumatic tool industry.

Today the brand is found around the world on a range of pneumatic and hydraulic
tools that includes breakers, rock drills, chipping hammers, clay-diggers, picks and
busters, scabblers, pumps and a whole lot more.

The Chicago Pneumatic brand is associated with powerful and reliable products that
are easy to maintain and that give good value for the money.

For more information please visit www.cp.com

Construction Tools EOOD
7000 Rousse
Bulgaria

About the Safety and operating
instructions

The aim of the instructions is to provide you with knowledge of how to use the
machine in an efficient, safe way. The instructions also give you advice and tell you
how to perform regular maintenance on the machine.
Before using the machine for the first time you must read these instructions carefully
and understand all of them.

5

9800 1394 01b | Original instructions

Safety and operating instructions

SCG 350, SCD 450

«
...
3
4
5
6
7
...
»

Summary of Contents for SCD 450

























Reviews:

No comments