9
Use the four bolts and washers in the
bag labeled
Foot Box Connect
Hardware
to connect the
Foot Box
to
the
Monitor Cabinet
and
Seat
Cabinet
as shown to the left. Tighten
the bolts with a 7/16” wrench. Note that
this image does not show the
Monitor
Cabinet
or
Seat Cabinet
so that you
can easily see where the bolts attach.
After thes bolts are tightened, tighten
the outside bolts with an Allen wrench.
Use the eight remaining bolts
and washers in the bag
labeled
Connector Bracket
Hardware
to connect the
Foot Box
to the other two
cabinets through the
Connector Brackets
.
Only tighten the bolts with
your hands. Do not tighten
with an Allen wrench until
after the next step.
Push the
Seat Cabinet
up to the
Foot Box
as
shown, so that the
Connector Brackets
are resting on the bases
of the
Monitor Cabinet
and
Seat Cabinet
. Pull
the three cables coming
from the bottom of the
Seat Cabinet
into
the
Foot Box
through
the rectangular hole.
Pull these three cables
through and make sure they
do not get pinched
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
