background image

Page 7

SKU 96706

For technical questions, please call 1-800-444-3353.

unPaCKing

When unpacking, check to make sure 

that the item is intact and undamaged.  If 

any parts are missing or broken, please 

call Harbor Freight Tools at  

1-800-444-3353 as soon as possible.

FunCtions

The Inverter converts power from 

a DC power source into AC power.  The 

resulting charge can then be used to 

power AC devices, such as power tools 

or appliances, up to a maximum of 5,000 

Watts.  Up to four devices can be powered 

at once, provided the sum of the devices’ 

maximum wattage remains below 5,000 

Watts.

installation

read the entire imPortant 

saFetY inFormation 

section at the beginning of this 

manual including all text under 

subheadings therein before set 

up or use of this product.

Caution!

  This Inverter must only be 

connected to batteries with a output 

voltage of 12 volts DC.  Lower volt-

age will not operate the Inverter prop-

erly, and more voltage could damage 

the Inverter or the device being pow-

ered.  Do not use this Inverter with 

positive ground electrical systems.

The Inverter is configured to have a 

number of shut-down points, for the 

safety of the operator, the unit, and the 

devices being used with it.  

If the DC rating input voltage from 

• 

the battery drops to 10.6V, the 

alarm on the Inverter will sound.  

Should the input voltage drop to 

10V the Inverter will shut down 

automatically.  Recharge the bat-

tery soon.
If the DC rating input voltage 

• 

from the battery exceeds 15V the 

Inverter will shut down automati-

cally.
When the output load power rises 

• 

higher than the rating power of the 

Inverter; the unit will shut down 

automatically.
The Inverter will automatically 

• 

shut down when its internal tem-

perature reaches 149° F.

rev 09b

sPeCiFiCations

Input Voltage

12-15 VDC

Output Voltage

120 V~, 60 Hz

Continuous Power

5,000 Watt

Surge Power

10,000 Watt

Operating Conditions 50° - 149° F (auto-shutdown @ 149° F)
AC Receptacles

Four 3-prong grounded polarized outlets

Fuse Type

Twenty 40 Amp Internal Fuses (professional replacement only)

Cable

#00 AWG or Thicker Cable Required (not included).

Overall Dimensions

22-1/2” L x 8” W x 6-7/8” H

Summary of Contents for Power Systems 96706















Reviews: