background image

Page 14

SKU 44849

For technical questions, please call 1-800-444-3353.

LIMITED 90 DAY WARRANTY

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality 

and durability standards, and warrants to the original purchaser that this product is free from 

defects in materials and workmanship for the period of 90 days from the date of purchase. This 

warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence 

or accidents, repairs or alterations outside our facilities, criminal activity, improper installa-

tion, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, 

injuries to persons or property, or for incidental, contingent, special or consequential damages 

arising from the use of our product. Some states do not allow the exclusion or limitation of in-

cidental or consequential damages, so the above limitation of exclusion may not apply to you. 

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR 

IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with 

transportation charges prepaid. Proof of purchase date and an explanation of the complaint 

must accompany the merchandise. If our inspection verifies the defect, we will either repair or 

replace the product at our election or we may elect to refund the purchase price if we cannot 

readily and quickly provide you with a replacement. We will return repaired products at our ex-

pense, but if we determine there is no defect, or that the defect resulted from causes not within 

the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also have other rights which 

vary from state to state.

3491 Mission Oaks Blvd.  •  PO Box 6009  •  Camarillo, CA 93011  •  (800) 444-3353

REV 08a

Summary of Contents for Chicago 44849















Reviews: