SKU 93255
For technical questions, please call 1-800-444-3353
.
Page 3
7.
Use the right tool for the job
. Do not attempt to force a small tool or attachment
to do the work of a larger industrial tool. There are certain applications for
which this tool was designed. It will do the job better and more safely at the
rate for which it was intended. Do not modify this tool and do not use this tool
for a purpose for which it was not intended.
8.
Maintenance
. For your safety, service and maintenance should be performed
by a qualified technician as a high voltage hazard exists within the unit circuitry.
Battery replacement is not hazardous, however.
9.
Check for damaged parts
. Before using any tool, any part that appears
damaged should be carefully checked to determine that it will operate properly
and perform its intended function. Do not use if any parts are broken; or any
other condition that may affect proper operation. Any part that is damaged
should be properly repaired or replaced by a qualified technician. Do not use
the tool if any switch does not turn On and Off properly.
10.
Replacement parts and accessories
. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this tool. Approved accessories are available
from Harbor Freight Tools.
11.
Grounded tools must be plugged into an outlet properly installed and
grounded in accordance with all codes and ordinances. Never remove
the grounding prong or modify the plug in any way. Check with a qualified
electrician if you are in doubt as to whether the outlet is properly grounded.
If the tools should electrically malfunction or break down, grounding provides
a low resistance path to carry electricity away from the user.
12.
Avoid body contact with grounded surfaces such as pipes, radiators,
ranges, and refrigerators.
There is an increased risk of electric shock if your
body is grounded.
13.
Do not abuse the Adapter Power Cord.
Never use the Power Cord to
carry the adapter or pull the Plug from an outlet. Keep the Power Cord
away from heat, oil, sharp edges, or moving parts. Replace damaged
Power Cords immediately.
Damaged Power Cords increase the risk of electric
shock.
14.
When operating a power tool outside, use an outdoor extension cord
marked “W-A” or “W”.
These extension cords are rated for outdoor use, and
reduce the risk of electric shock.
Note
: Performance of this Spotlight may vary depending on variations in local line
voltage while charging, or Spotlight Battery power.
