SKU 98332
For technical questions, please call 1-800-444-3353.
Page 5
approved safety equipment, such as
those dust masks that are specially
designed to filter out microscopic
particles. (California Health & Safety
Code § 25249.5,
et seq.
)
Cleaning may produce Aluminum
6.
Oxide dust which can cause eye, skin
or breathing irritation. Always use a
NIOSH approved respirator, safety
goggles and rubberized gloves when
operating this tool.
Always use water based solvents
7.
when operating this tool. Water based
solvents have a pH greater than 7.
Use of other types of solvents may
cause injury.
DO NOT use any highly flammable,
8.
volatile or combustible solvents such
as gasoline, kerosine, etc. in this tool.
Parts being cleaned may deposit oil,
9.
grease, gasoline or other combustible
contaminants in the tool. Check for
volatile fumes, and use this tool only
in a well-ventilated area.
WARNING: Chlorinated solvents
10.
such as 1-1-1 Trichloroethane and
Methylene Chloride can chemically
react with aluminum and may ex-
plode. Many parts contain aluminum.
Do not clean aluminum parts with
these solvents.
WARNING: Handling the cord on
11.
this product will expose you to lead,
a chemical known to the State of
California to cause cancer, and birth
defects or other reproductive harm.
Wash hands after handling. (Califor-
nia Health & Safety Code § 25249.5,
et seq.)
The warnings, precautions, and in-
12.
structions discussed in this instruction
manual cannot cover all possible con-
ditions and situations that may occur.
It must be understood by the operator
that common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
saVe these
instructions.
GroundinG
to PreVent
electric shocK
and death From
incorrect GroundinG
Wire connection:
Check with a qualified
electrician if you are in doubt
as to whether the outlet is
properly grounded. do not
modify the power cord plug
provided with the tool. never
remove the grounding prong
from the plug. do not use the
tool if the power cord or plug
is damaged. if damaged, have
it repaired by a service facility
before use. if the plug will not
fit the outlet, have a proper
outlet installed by a qualified
electrician.