Chicago Electric 96299 Operating Instructions Manual Download

Page: 8 / 14

SKU 96299

For technical questions, please call 1-800-444-3353.

PAGE 8

Lithium Battery Charging Safety

Do not leave unattended while charging.

Battery charging should be done by adults only.

Charge on non-flammable surface and keep away from flammable items.

Turn charger off when battery is charged, and unplug charger from battery-powered

device.

Disconnect AC wall chargers from outlets while not in use.

If battery-powered device has been damaged, immediately stop use, unplug, and

safely move away from flammable materials.

Follow instructions for charging battery. Do NOT charge longer than

recommended.

SyMBOLOGy

Double Insulated

Canadian Standards Association

Underwriters Laboratories, Inc.

Volts Alternating Current

Amperes

n0 xxxx/min.

No Load Revolutions per Minute (RPM)

UNPACKING

When unpacking, check to make sure that the product is complete and undamaged.

If any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.

REV 08c

Summary of Contents for 96299















Search results

Summary of Contents for 96299

Reviews:

Related manuals for 96299

Brands by name

Popular brands

Chicago Electric 96299, Operating Instructions Manual

Search results

Summary of Contents for 96299

Reviews:

Related manuals for 96299

Brands by name

Popular brands