background image

SKU 95111 

For technical questions, please call 1-800-444-3353.

         Page 2

PRODUCT SPECIFICATIONS

SAVE THIS MANUAL

 

You will need this manual for the safety warnings and precautions, assembly, 

operating, inspection, maintenance and cleaning procedures, parts list and assem-
bly diagram.  Keep your invoice with this manual.  Write the invoice number on the 
inside of the front cover.  Keep this manual and invoice in a safe and dry place for 
future reference.

IMPORTANT SAFEGUARDS

READ AND UNDERSTAND ALL INSTRUCTIONS

When using electrical appliances, basic safety precautions should always be fol-
lowed including the following:

1. 

Read all instructions.

2. 

Do not touch hot surfaces. 

Use handles or knobs. 

3. 

To protect against electrical shock do not immerse cord, plugs, or the main 
unit in water or other liquid.  

Only the Egg Beaters (16) and the Dough Beaters 

(18) may be immersed for cleaning. Thoroughly clean and dry these parts prior to 
first use and before every subsequent use. Do not insert Beaters into the body of 
the Mixer without drying thoroughly.

4. 

Close supervision is necessary when any appliance is used by or near 
children.

5. 

Unplug from outlet when not in use and before cleaning. Unplug from outlet 
when inserting or removing Beaters. 

6. 

Do not operate any appliance with a damaged cord or plug or after the 
appliance malfunctions or has been damaged in any manner.

 Return 

appliance to the nearest authorized service facility for examination, repair, or 
adjustment.

Material, Colors, Finishes

Cream Colored Injection Molded Polypropylene Plastic

Beaters (2) and         
Dough Beaters (2)

Stamped and Formed Stainless Sheet Steel and        
Machined Steel Rod with Polished Finished

Power Switch Type

7 Position Push Lever Switch; Setting OFF, ON and 
Speeds 1 through 6

Voltage

120VAC, 60Hz

Summary of Contents for 95111











Reviews: