SKU 94009
Page 3
For technical questions, please call 1-800-444-3353.
4.
Observe work area conditions. Do not use devices in damp or wet locations.
Don’t expose to rain. Keep work area well lighted. Do not use electrically pow-
ered devices in the presence of flammable gases or liquids.
5.
Keep children away. Children must never be allowed in the work area. Do not
let them handle machines, devices, or extension cords.
6.
Store idle equipment. When not in use, devices must be stored in a dry loca-
tion to inhibit rust. Always lock up devices and keep out of reach of children.
7.
Use the right inverter for the job. Do not attempt to force a small inverter or
attachment to do the work of a larger industrial inverter. There are certain appli-
cations for which this inverter was designed. It will do the job better and more
safely at the rate for which it was intended. Do not modify this inverter and do
not use this inverter for a purpose for which it was not intended.
8.
Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically nonconductive clothes and nonskid foot-
wear are recommended when working. Wear restrictive hair covering to contain
long hair.
9.
Use eye protection. Always wear ANSI approved impact safety goggles when
using inverters.
10. Do not overreach. Keep proper footing and balance at all times. Do not reach
over or across running machines.
11. Maintain inverters with care. Keep inverters clean for better and safer perfor-
mance. Follow instructions for changing accessories. Inspect inverter cords
periodically and, if damaged, have them repaired by an authorized technician.
12. Disconnect power. Unplug inverter when not in use.
13. Avoid unintentional starting. Be sure the switch is in the Off position when
not in use and before plugging in any appliance.
14. Stay alert. Watch what you are doing, use common sense. Do not operate any
inverter when you are tired.
15. Check for damaged parts. Before using any inverter, any part that appears
damaged should be carefully checked to determine that it will operate properly
and perform its intended function. Check for alignment and binding of moving
parts; any broken parts or mounting fixtures; and any other condition that may
affect proper operation. Any part that is damaged should be properly repaired or
replaced by a qualified technician. Do not use the inverter if any switch does not
turn On and Off properly.
16. Servicing. This device should be serviced only by a qualified technician. This
item does not have any user-replaceable parts.
