background image

SKU 93449

For technical questions please call 1-800-444-3353

Page 5

Unpacking

When unpacking, check to make sure that the product is intact and undamaged,
and all accessories listed below are
included.

1/2” Drive Cordless Hammer Drill
(2) Rechargeable Batteries
Auxiliary Handle with Depth Gauge
Quick Charge Battery Recharge Unit
Plastic Storage Case

If any parts are missing or broken, please
call Harbor Freight Tools at the number
on the cover of this manual.

Using the Battery Charger

NOTE:

 Battery Packs will not reach full charge the first time they are charged.

Allow several cycles (operation followed by recharging) before the Battery Pack will
become fully charged.

Battery Temperature Warning:

WARNING: 

Battery explosion may cause

serious personal or property injury
including death. Charge the Battery Pack
only within a 50° to 100° F. temperature
range. Lower temperatures may inhibit
charging. Higher temperatures increase
chance of battery failure, including
explosion.

Battery Charger Safety:

1.

Charge the Battery Pack only with

the included charger. Use of other
chargers may cause battery failure
including explosion.

2.

Ensure that the Battery Charger is connected only to a 120 VAC, 60 Hz power

supply that includes a circuit breaker.

Using the Battery Charger

Summary of Contents for 93449













Reviews: