background image

SKU 91979

      For technical questions, please call 1-800-444-3353.

   Page 

13

Part #

Description

1

Heater 500 Watts (not shown)

2

Mains ON Indicator Light

3

Heater ON Indicator Light

4

Plug/Cord (not shown)

5

Thermostat

6

Oven Door

7

Adjustable Vent

8

Heater Element (not shown)

6

2

3

Parts Diagram

5

7

Note:  Some parts are listed and shown for illustration purposes only and are not available
individually as replacement parts.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS
A REFERENCE TOOL ONLY.  NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY
REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE
ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE
PRODUCT.  IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS
AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS
AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER
REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR
HER INSTALLATION OF REPLACEMENT PARTS THERETO.

1- (not shown)
4- (not shown)
8- (not shown)

Parts List

Summary of Contents for 91979














Reviews: