Page 3
SKU 90304
8.
Do not overreach
. Keep proper footing and balance at all times. Do not reach over
or across running machines.
9.
Maintain tools with care
. Keep tools clean for better and safer performance. Follow
instructions for lubricating and changing accessories. Inspect tool cords periodically,
and if damaged, have them repaired by an authorized technician. The handle must be
kept clean, dry, and free from oil and grease at all times.
10.
Disconnect power
. Unplug tool when not in use.
11.
Avoid unintentional starting
. Be sure the trigger is in the Off position when not in
use and before plugging in. Do not carry any tool with your finger on the trigger,
whether it is plugged in or not.
12.
Stay alert
. Watch what you are doing, use common sense. Do not operate any tool
when you are tired. The Concrete Vibrator is a physically demanding tool to use. Use
the tool for short periods of time to avoid fatigue and possible accidents.
13.
Check for damaged parts
. Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts
or mounting fixtures; and any other condition that may affect proper operation. Any
part that is damaged should be properly repaired or replaced by a qualified
technician. Do not use the tool if the trigger does not turn On and Off properly.
14.
Guard against electric shock
. Prevent body contact with grounded surfaces such
as pipes, radiators, ranges, and refrigerator enclosures.
15.
Replacement parts and accessories
. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use accessories
intended for use with this tool. Approved accessories are available from Harbor
Freight Tools.
16.
Do not operate tool if under the influence of alcohol or drugs
. Read warning
labels if taking prescription medicine to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the tool.
17.
Use proper size and type extension cord
. If an extension cord is required, it must
be of the proper size and type to supply the correct current to the tool without heating
up. Otherwise, the extension cord could melt and catch fire, or cause electrical
damage to the tool. This tool requires use of an extension cord with up to
10 amps
capability (up to 50 feet), with wire size rated at
18 AWG
. Longer extension cords
require larger size wire. If you are using the tool outdoors, use an extension cord rated
for outdoor use. (signified by “WA” on the jacket).
18.
Maintenance
. For your safety, service and maintenance should be performed
regularly by a qualified technician.
19.
Pacemaker safety warning
. People with pacemakers should consult with their
physician(s) before using this product; operation of equipment in close proximity to a
heart pacemaker could cause interference or failure of the pacemaker.
