Page 6
For technical questions, please call 1-888-866-5797.
Item 68199
Instructions for Putting into Use
Read the ENTIRE IMPORTANT SAFETY
INFORMATION section at the beginning
of this manual including all text
under subheadings therein before
set up or use of this product.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL
OPERATION:
Release the Trigger and unplug the tool
from its electrical outlet before adjusting
tool or installing accessories.
Note:
For additional information regarding the
parts listed in the following pages, refer to
Parts List
and Assembly Diagram
on page 9.
Functions
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY
INFORMATION section at the beginning
of this manual including all text
under subheadings therein before
set up or use of this product.
Tool Set Up
TO PREVENT SERIOUS INJURY FROM
ACCIDENTAL OPERATION:
Turn the Power Switch of the tool off and
unplug the tool from its electrical outlet before
adjusting tool or installing accessories.
Swivelling Cutter Head
1. Put on heavy-duty work gloves and ANSI-
approved safety goggles to avoid injury.
2. Loosen the three hex head bolts using the hex
wrench provided with this tool. See above.
3. Firmly grip the cutter head and twist it to the
desired position. Tighten the three hex bolts
to keep the Cutter Head in that position
Work Piece and Work Area Set Up
1. Designate a work area that is clean and well-
lit. The work area must not allow access by
children or pets to prevent distraction and injury.
2. Route the power cord along a safe route to reach
the work area without creating a tripping hazard or
exposing the power cord to possible damage. The
power cord must reach the work area with enough
extra length to allow free movement while working.
3. Secure loose work pieces using a vise or clamps
(not included) to prevent movement while working.
4. There must not be objects, such as utility lines,
nearby that will present a hazard while working.
Trigger
Trigger
Lock
Belt Tab
