Page 4
For technical questions, please call 1-800-444-3353.
SKU 67632
Do not modify the plug provided – if it will
2.
not fit the outlet, have the proper outlet
installed by a qualified electrician.
Improper connection of the equipment-
3.
grounding conductor can result in a risk
of electric shock. The conductor with
insulation having an outer surface that
is green with or without yellow stripes is
the equipment-grounding conductor. If
repair or replacement of the electric cord
or plug is necessary, do not connect the
equipment-grounding conductor to a live
terminal.
Check with a qualified electrician or
4.
service personnel if the grounding
instructions are not completely
understood, or if in doubt as to whether
the tool is properly grounded.
Use only 3-wire extension cords that
5.
have 3-prong grounding plugs and
3-pole receptacles that accept the tool’s
plug.
Repair or replace damaged or worn cord
6.
immediately.
125 V~ 3-prong plug and outlet
(for up to 125 V~ and up to 15 A)
grounding
pin
This tool is intended for use on a circuit
7.
that has an outlet that looks like the one
illustrated above in
125 V~ 3-prong
plug and outlet
. The tool has a
grounding plug that looks like the plug
illustrated above in
125 V~ 3-prong
plug and outlet
.
The outlet must be properly installed and
8.
grounded in accordance with all codes
and ordinances.
Do not use an adapter to connect this
9.
tool to a different outlet.
tumbler Safety Warnings
Do not USe oUtDooRS.
1.
Do not USe With SAnD.
2.
Do not overload Tumbler.
3.
Do not place Tumbler on a table. The
4.
unit’s vibration may cause the Tumbler to
move when placed on a smooth, slippery
surface.
Use only in a safe, accessible location
5.
(such as a garage floor) near a power
outlet.
Do not use near flammable materials.
6.
Do not use in a closet or drawer; the
7.
Tumbler requires proper ventilation.
Avoid extreme temperatures. Do not
8.
let Tumbler freeze as the water in the
Rubber Barrel (12) will freeze and
become unbalanced. This can overload
the motor.
Do not touch motor immediately after
9.
use. Motor becomes hot to the touch
during operation.
Maintain labels and nameplates on
10.
the tool. These carry important safety
information. If unreadable or missing,
contact Harbor Freight Tools for a
replacement.
Avoid unintentional starting. Prepare to
11.
begin work before turning on the tool.
People with pacemakers should
12.
consult their physician(s) before use.
Electromagnetic fields in close proximity
