manualshive.com logo in svg

Chicago Electric 60373, Owner'S Manual & Safety Instructions, Page: 12 / 40

Share
Download
Chicago Electric 60373 Owner'S Manual & Safety Instructions Download Page 12

Page 12

For technical questions, please call 1-888-866-5797.

Item 60373 

        

Setup - Before Use:

  Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this 

manual including all text under subheadings therein before set up or use of this product.

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: 
Turn the Power Switch of the tool off and unplug the tool from its electrical 
outlet before assembling or making any adjustments to the tool.

Note:

 For additional information regarding the parts listed in the following pages, 

refer to the Assembly Diagram near the end of this manual.

ASSEMBLY

Adjusting the Wheel Guard

TO PREVENT SERIOUS INJURY: Do not operate this tool without the Wheel Guard properly installed.

1.  Loosen the Wheel Guard Bolt.

2.  Rotate the Wheel Guard as needed to 

shield you during the planned work.

3.  Tighten the Wheel Guard Bolt securely.

4.  Check the Wheel Guard to ensure it is firmly in place. 

Adjust if necessary before proceeding.

Installing the Side Handle

TO PREVENT SERIOUS INJURY: 
Do not operate this tool with one hand only or without the Side Handle properly installed.

1.  The Side Handle may be installed on 

either side of the Gear Housing. 

2.  Screw the threaded end of the 

Side Handle into the selected position. 
Tighten securely before beginning work.

SAFETY

OPERA

TION

MAINTENANCE

SETUP

Summary of Contents for 60373









































Reviews:

No comments