SKU 41144
For technical questions, please call 1-800-444-3353.
Page 5
Wash hands after handling. (Califor-
nia Health & Safety Code § 25249.5,
et seq.
)
It is advisable to clamp the cable
a.
end clamps onto a non-conductive
material such as plastic or wood to
keep them from touching.
With the help of an assistant (if nec-
5.
essary) to hold the Panel steady and
in place, drive the supplied screws
through the smaller mounting holes
and into the holes drilled into the
mounting surface.
The solar panel is now ready to be at-
6.
tached to a battery for recharging.
mount on horizontal surface
The Solar Panel (1) can be placed
1.
flat on the ground or floor, or placed
at an angle using the two supplied
threaded Mounting Stand Rods (6).
(See Fig. 2.)
Although it is not necessary, the
a.
cable plug can be plugged into the
electrical connection with the clamps
attached to non-conductive material.
Placing at an angle enables the panel
2.
to make most efficient use of sunlight.
The Mounting Stand Rods (6) thread
a.
into two bolts built into the back of
the frame at the opposite end from
the connector.
The Mounting Stand Rods can be
3.
moved closer to the center of the
frame to give a greater angle if de-
sired.
With the panel placed at the desired
4.
location, the cable clamps can now
be attached to the proper battery
terminals.
Fig. 2
Mounting Stand Rods (6)
