SKU 65057
For technical questions, please call 1-800-444-3353.
Page 8
SpeciFicationS
Electrical Requirements 110 V~ / 60 Hz
Power Usage
36 Watts
Cord Type
2-prong polarized
Operating Temperature Heating Tube: 248° F.
Razor Blade: 169° F.
Blade Requirement
Standard single edge
reinforced utility razor
blade
unpacKing
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
list of contents
part(s)
description
Q’ty
Decal Remover
1
10
Utility Razor Blade
2
11
Tool Holder
1
inStRuctionS FoR
putting into uSe
Read the entiRe impoRtant
SaFetY inFoRmation
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
to pReVent
SeRiouS injuRY
FRom accidental
opeRation:
unplug the tool from its
electrical outlet before
assembling or making any
adjustments to the tool.
note:
For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
assembly
Before use, a Blade (10) must be
1.
inserted in the Blade Holder (6). Slide
the Blade into the Holder from the
side.
caution: the Blade is sharp
and can easily cut you or
cause injury or damage.
Handle with care.
Functions
This tool is useful for removing de-
1.
cals, pin striping and stickers from
hard surfaces.
opeRating inStRuctionS
Read the entiRe impoRtant
SaFetY inFoRmation
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
Work piece and Work area Set up
Designate a work area that is clean
1.
and well-lit. The work area must not
