Chic Technology RMO231UP User Quick Manual Download Page 2

Navigator Mouse

1

© 

2004 All Rights Reserved.  The copyright is the property of its respective owners.

Federal Communications Commission (FCC) requirements, Part 15

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications.  However, there is no guarantee that interference will not 
occur in a particular installation.  If this equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the 
following measures:
__Reorient or relocate the receiving antenna.
__Increase the separation between the equipment and receiver.
__Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
__Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Any changes of modifications not expressly approved by the grantee of this device could void the user's authority to 
operate the equipment.

This device complies with Part 15 of the FCC Rules.  Operation is subject to the following two conditions:  (1) this device may not 
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause 
undesired operation.

CE Declaration Of Conformity

Hereby, the manufacturer, declares that this Navigator Mouse is in compliance with the essential requirements and other relevant 
provisions of Directive 1999/5/EC.
Essential requirements _ Article 3 
Protection requirements for health and safety _ Article 3.1a 
__Testing for electric safety according to EN 60950 has been conducted. These are considered relevant and sufficient. 
Protection requirements for electromagnetic compatibility _Article 3.1b 
__Testing for electromagnetic compatibility according to EN 301 489_1 and EN 301 489_03 has been conducted. These are 
considered relevant and sufficient. 
Effective use of the radio spectrum _Article 3.2
__Testing for radio test suites according to EN 300 220_3 has been conducted. These are considered relevant and sufficient.

Congratulations on your purchase of this Navigator Mouse.  
Please carefully read the User's Quick Guide to learn about the 
installation and the powerful functions of your new Navigator 
Mouse.

Contents of the Package

ü

 Navigator Mouse (Wireless Optical or Wired Optical)

ü

 Receiver for Wireless Optical Mouse

ü

 Two AA Batteries for Wireless Optical Mouse

ü

 Mouse Driver CD-ROM

ü

 User's Quick Guide

ü

 Optional Parts for Wireless Optical Mouse

(The optional parts may be different due to various wireless 
optical mice.)

Summary of Contents for RMO231UP













Reviews: