2
Instructions
Channel setting
1
Use
UP
▲
/ DOWN
▼
button to go to the
CHANNEL
｜
FREQUENCY page.
2
Press and hold the
SET
button for 2
seconds, then the upper-right channel
number will flash to allow changes to be
made.
3
Press
UP
▲
/ DOWN
▼
buttons to change
the channel number. The corresponding
frequency will change accordingly.
4
After selecting a channel, press and hold
the
SET
button for 2 seconds or wait 9
seconds to save the setting.
Battery type setting
1
Use
UP
▲
/ DOWN
▼
button to go to the
BATTERY TYPE page.
2
Press and hold
SET
button for 2 seconds,
then the cursor
will flash to allow
changes to be made.
3
Press
UP
▲
/ DOWN
▼
button to select
either
NiMH
(rechargeable battery) or
AKLN
(alkaline battery).
4
After selecting the battery type, press and
hold the
SET
button for 2 seconds or wait 9
seconds to save the setting.
IMPORTANT
:
NiMH
battery must be selected when rechargeable battery is being used. Never
select
AKLN
(alkaline) when transmitter is intended for charging as alkaline battery isn
’t
rechargeable. Wrong battery selection will result in battery sensing electronics to display wrong
and misleading status information.
SET
SET
SET
SET
SET
SET
SET
SET
