4
Instructions
Audio output connection
Balanced output
XLR connector provides balanced audio output signal from this jack to the mixer/amplifier.
Use
an audio output cable with “XLR” or “Cannon” connector, connect one end to the
balanced output jack of the receiver, and the other end to the “
MIC IN
” jack of the mixer/
amplifier.
Unbalanced mixed output
¼
” PHONE PLUG connector provides unbalanced audio output signal from this jack to the
mixer/amplifier.
Use an audio output cable with ¼
” PHONE PLUG connectors. Connect one
end from the unbalanced output jack of the receiver, and the other end to the “
LINE IN
” or
“
MIC IN
” jack of the mixer/ amplifier.
MIC-LINE level switch setting
When connecting to the
LINE /AUX IN
of a mixer/
amplifier, switch to “
LINE
” position. DO NOT
use the “
MIC
” position as they may not deliver a sufficient high output level. When connecting
to the “
MIC IN
” jack of a mixer/amplifier, switch to “
MIC
” position. Overload distortion may
occur at the wrong level position.
MIC
level for connecting to
MIC IN
.
LINE
level for connecting to
LINE IN
or
AUX IN
.
Summary of Contents for SDR-1900
Page 7: ...6 Instructions...
