5
NDR-2110
VHF Auto Sync Receiver
Audio output connection
Unbalanced output
: ¼” PHONE PLUG connector provides unbalanced audio output signal
from this jack to the mixer/amplifier.
Use an audio output cable with ¼” PHONE PLUG
connectors. Connect one end from the unbalanced output jack of the receiver, and the other
end to the “
LINE IN
” or “
MIC IN
” jack of the mixer/ amplifier.
Level switch setting
: When connecting to the
LINE /AUX IN
of a mixer/amplifier, switch to
“
LINE
” position. DO NOT use the “
MIC
” position as they may not deliver a sufficient high
output level. When connecting to the “
MIC IN
” jack of a mixer/amplifier, switch to “
MIC
”
position. Overload distortion may occur at the wrong level position.
LINE IN
MIC IN
LINE/AUX IN
MIC IN
LEVEL
LINE
LEVEL
MIC
Receiver installation
For best operation, the receiver should be at least 1m above the
ground and 1m away from a wall or metal surface to minimize
reflections. The transmitter should also be at least 1m away from a wall
or metal surface to minimize reflections. The transmitter should also be
at least 1m away from the receiver. Keep antennas away from noise
source such as motors, automobiles, neon light as well as large metal
objects.
DC12V
POWER
ANT.
MIC LINE
OUTPUT
LEVEL
DC12V
POWER
ANT.
MIC LINE
OUTPUT
LEVEL
MIC
LINE
LEVEL
MIC
LINE
LEVEL
1m
1m
1m
