2
Instructions
Channel synchronizing of the receiver and transmitter
Changing the transmitter’s channel
Press the synchronizing button of the
receiver and the receiver will transmit the
frequency to the transmitter and
synchronize its channel.
If it doesn’t work check that you have the IR sensor panels aligned, that they are facing each
other, devices are within 10~30cm of each other, and try again.
GAIN setting (GT
｜
MT)
Gain control enables the user to set different output levels.
GT
(LEFT) is for the use of instrument with
high impedance, such as guitar.
MT
(RIGHT)is for the use of low impedance
such as lapel or headset microphones
IR
RF AF
SYNC
To achieve successful
synchronization, hold the
receiver and transmitter
within 10-30cm of each
other.
