6
Instructions
Changing battery type
1
Press the
SET
button to choose BATTERY
TYPE page.
2
P
ress the ▲▼ buttons to select either NiMH
(rechargeable battery) or AKLN (alkaline
battery).
►
►
3
After a battery type is chosen, press
SET
button or wait 5 seconds to store the setting.
Battery charging
NiMH battery must be selected when rechargeable battery is in use. DO NOT select AKLN
(alkaline) when transmitter is intended for charging as alkaline battery isn’t rechargeable. Wrong
battery setting will affect battery sensing electronics and may display wrong status information.
Charging indicator
During charging
Fully charged
Indicator flashes RED
Indicator glows RED
Sensitivity setting
After opening the battery compartment cover, a SENS trimmer potentiometer
⑧
can be found
nearby the SET button
⑨
.
Higher sensitivity will lower the dynamic range of input signals, which may result in more noise
and feedback problem. Please set the sensitivity at a proper level.
When the microphone is held close to the mouth, a lower sensitivity is recommended.
When the microphone is mounted on the stand, a higher sensitivity is recommended.
The sensitivity level can be adjusted by rotating the potentiometer with a small screw driver.
Clockwise direction to increase the level.
SET
SENS
