Chiayo Challenger ICOO, Operation Manual

Page: 11 / 32

-10-
RP-6100m/RP-6016m Transmitter module
1. Channel indicator
2. Antenna socket(TNC type)
3.Channel selectors: Press ▲(up)▼(down) to
increase/decrease channel number. Please select a
non-interfering frequency channel to those used in the
receiver modules.
4. Power on/off
5. Audio sensitivity: Clockwise to increase its
sensitivity level and anticlockwise to reduce.
6. Output power switch. L for LOW output power and H for high output power. LOW output
power will reduce the RF transmission distance and HIGH output power will extend the
possible RF transmission distance.
However, if RP-6016m is installed in portable amplifiers, HIGH output power will reduce
more operation time than LOW output power since it requires more power for longer RF
transmission.
DP-600M MP3 module
1
3 2 4
5 6 7
8
10
9
11
1. LCD display
2. Skip backward(short press), fast reverse(long press).
3. Play/pause(short press), USB/SD(long press).
4. Skip forward(short press), fast foreward(long press).
5. Previous folder.
6. Play modes(POP ROCK JAZZ CLASSIC COUNTRY NORMAL)
Repeat modes(ALL-repeat all, RANDOM-repeat random, SINGLE-repeat single track,
FLDER-repeat single folder)
7. Next folder.
8. Infrared sensoring area.
9. USB input
10. USB/SD card indicator (GREEN). This LED doesn't glow by default. It only flashes
when the track plays.
11. SD card input
12. Power/volume control
To use the USB/SD digital player, simply plug your USB/SD card into the port after the
player is turned on. To prevent any possible damage to the USB/SD card, always detach it
after the player has been shut off.
This player can read MP3 files only. Other formats such as WMA and WAV aren't supported
. The USB and SD card must be FAT/FAT32 formatted.
Operating functions on the panel and the remote:
1
3
2
4
5
6