39
EN
Cheyenne HAWK spirit & HAWK thunder
In order to fit the protective sleeve (2) on
the connection cable and drive:
!
If already inserted: Remove the connec-
tion cable from the HAWK SPIRIT or the
HAWK THUNDER.
!
Cut o
ff
a section of protective sleeve of an
appropriate length.
!
Slide this section of protective sleeve
completely over the connecting cable.
!
Connect the connection cable (see the
next chapter).
!
Pull the end of the protective sleeve
(2)
completely over the HAWK SPIRIT or
HAWK THUNDER.
!
Ensure that the two protective sleeves
overlap. For instance, fix them with
a
rubber band or adhesive film.
5.4
Connecting the power unit
CAUTION
Risk of short circuits and risk of mild
electric shocks
If cable or cable connection is visibly
damaged, there is a risk of electric shock
and damage to the electronics.
!
Perform a visual inspection of the
HAWK SPIRIT or HAWK THUNDER and
the cable for signs of damage, e.g.
a
defective cable connection.
!
Never bend the connecting cable while
in operation.
!
Observe the operating instructions for
the particular power unit.
CAUTION
Cables constitute a trip hazard
People can stumble over inappropriately
routed cables and get injured.
!
Route all cables so that no-one can
stumble over them or pull them ac-
cidentally.
1
3
2
