Chevrolet Volt 2017 Page 180 Owner'S Manual Download | Manualshive

Page: 180 / 376

background image

Chevrolet VOLT Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9807421) - 2017 - CRC - 11/18/15

Driving and Operating

179

If the vehicle has an uncharged
12-volt battery or a 12-volt battery
with low voltage, try charging or
jump starting the 12-volt battery.
See

Battery - North America

or

Jump Starting - North

If the shift lever cannot be moved
out of P (Park):

1. Apply and maintain the regular

brakes.

2. Turn the vehicle on using

POWER

O

. See

.

3. Let up on the shift lever and

make sure the shift lever is
pushed all the way into
P (Park).

4. Press the shift lever button.

5. Move the shift lever into the

desired gear.

If you still cannot move the shift
lever from P (Park), see your dealer
or a professional towing service.

Parking over Things
That Burn

{

Warning

Things that can burn could touch
hot exhaust parts under the
vehicle and ignite. Do not park
over papers, leaves, dry grass,
or other things that can burn.

Electric Vehicle
Operating Modes

System Operation

This vehicle is an Extended Range
Electric Vehicle (EREV). It uses an
electric propulsion system to drive
the vehicle at all times. Electricity is
the vehicle's primary source of
energy, while gasoline is the
secondary source.

The vehicle has two modes of
operation: Electric and Extended
Range. In Electric Mode, the vehicle
is propelled by its electric drive unit
only. It converts electrical energy
into mechanical energy to drive the
wheels. In Extended Range Mode,
both the battery and the engine
power the vehicle. The vehicle's
performance remains nearly the
same in either mode. See

for Better Energy Efficiency

.

«
...
178
179
180
181
182
...
»

Summary of Contents for Volt 2017

























































































































































































































































































































































































Reviews:

No comments

Related manuals for Volt 2017

Brand: Oldsmobile Pages: 360

Brand: Whispbar Pages: 16

Brand: GATmatic Pages: 13

2013 C-Class Coupe

Brand: Mercedes-Benz Pages: 388

Brand: Standby Pages: 10

Brand: B-Speech Pages: 24

Brand: AC Schnitzer Pages: 16

Brand: Xblitz Pages: 30

Brand: SAN HIMA Pages: 7

Peterbilt SmartAir

Brand: Paccar Pages: 58

Brand: Mercedes-Benz Pages: 153

Brand: Honda Pages: 20

2009 Rio Series

Brand: Kia Pages: 219

2000 Oldsmobile Intrigue

Brand: Oldsmobile Pages: 348

Brand: ULTIMATE SPEED Pages: 32

Brand: Chevrolet Pages: 441

Cuda TriOptic 351014F Series

Brand: Federal Signal Corporation Pages: 4

Brand: Kia Pages: 216

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands