Chevrolet Volt 2017 Page 27 Owner'S Manual Download | Manualshive

Page: 27 / 376

background image

Chevrolet VOLT Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9807421) - 2017 - CRC - 11/18/15

26

In Brief

Driving for Better Energy
Efficiency

Use the following tips to help
maximize energy efficiency and
range.

In colder temperatures, while these
efficiency tips will help, the electric
vehicle driving range may be lower
due to higher energy usage.

Driving Style

Efficiency Gauge (Instrument
Cluster)

The ball indicator should be kept
green and toward the center of the
gauge for efficient operation.

Inefficient acceleration is indicated
when the ball turns yellow and
travels above the center of the
gauge.

Aggressive braking is indicated
when the ball turns yellow and
travels below the center of the
gauge.

Acceleration/Braking/Coasting

Avoid unnecessary rapid
accelerations and decelerations.

Electric range is maximized at
80 km/h (50 mph) and below. Higher
speeds use more energy and can
significantly reduce electric range.

Use cruise control when
appropriate.

Plan ahead for decelerations and
coast whenever possible. For
example, do not rush to traffic
signals.

Do not shift to N (Neutral) to coast.
The vehicle recovers energy while
coasting and braking in D (Drive)
or L (Low).

Drive Mode and PRNDL Selection

Use Normal Mode when possible.

Sport Mode provides more
responsive acceleration than
Normal Mode but can reduce
efficiency.

Use Mountain Mode prior to
climbing long, steep grades in
mountainous areas. Be sure to
engage Mountain Mode before
starting to climb. Mountain Mode
reduces electric range and power
but may be needed to maintain
speeds or steep grades.

Use Hold Mode on a trip where it is
expected that all of the electric
charge will be depleted. Use Hold
Mode mainly during highway or high
speed driving to maximize both EV
miles and fuel efficiency.

Use L (Low) in heavy stop-and-go
traffic or when traveling downhill.
L (Low) requires less brake pedal
application and provides a
controlled, efficient way to slow the
vehicle down.

Climate Setting

Using the heat and air conditioning
systems decreases the energy
available for electric driving.

Optimal energy efficiency is
achieved with the heat, air
conditioning, and fan turned off.

«
...
25
26
27
28
29
...
»

Summary of Contents for Volt 2017

























































































































































































































































































































































































Reviews:

No comments

Related manuals for Volt 2017

Brand: Daihatsu Pages: 43

Brand: Mobis Pages: 16

Brand: Subaru Pages: 216

Brand: Kolpin Outdoors Pages: 6

Brand: Schartec Pages: 2

Brand: Caltrend Pages: 2

Brand: Audiovox Pages: 1

EGR-3PVE-COLOUR

Brand: EGR Pages: 28

Brand: Thule Pages: 8

Brand: A-Tach Pages: 2

Brand: SNIPER Pages: 2

Brand: Mercedes-Benz Pages: 91

Brand: Mitsubishi MOTORS Pages: 416

Brand: S&B Filters Pages: 4

Brand: Mazda Pages: 3

Brand: Axxess Pages: 8

Brand: JBA Pages: 5

Brand: Belkin Pages: 30

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands