Chevrolet VOLT 2014 Owner'S Manual Download Page 13

Page: 13 / 394

(7,1)

Chevrolet VOLT Owner Manual (GMNA-Localizing-U.S./Canada-6014139) -

2014 - CRC - 9/16/13

In Brief

1-7

Windows

The power window switches are on
the driver door armrest. Each
passenger door has a switch that
controls only that window.

Press the front of the switch to lower
the window. Pull the switch up to
raise it.

The driver and passenger windows
have an express-down feature and
the driver window has express-up.

See

Power Windows on page 2-18

Remote Window Operation

If equipped, press and hold

the RKE transmitter to open all
windows from outside the vehicle.

This feature can be disabled by a
dealer technician.

See

Power Windows on page 2-18

Seat Adjustment

Seat Position

To adjust the seat position:

1. Pull the handle at the front of the

seat cushion to unlock it.

2. Move the seat forward or

rearward and release the
handle.

3. Try to move the seat back and

forth to be sure it is locked in
place.

See

Seat Adjustment on page 3-3

Height Adjustment

Move the lever up or down to raise
or lower the seat.

See

“

Seat Height Adjuster

”

under

Seat Adjustment on page 3-3

Summary of Contents for VOLT 2014











































































































































































































































































































































































































Search results

Summary of Contents for VOLT 2014

Reviews:

Related manuals for VOLT 2014

Brands by name

Popular brands

Chevrolet VOLT 2014, Owner'S Manual

Search results

Summary of Contents for VOLT 2014

Reviews:

Related manuals for VOLT 2014

Brands by name

Popular brands