Chevrolet VENTURE 1999 Owner'S Manual Download Page 25

Page: 25 / 440

yellow

blue

1-17

You can also lift the lever on the side of the seat to
release the rear latches from the floor pins.

Do not let go of the straps or lever until the seat is
folded all the way forward.

4. To unlatch the front latches, with the seat folded

forward, squeeze the angled latch release bar toward
the straight crossbar.

5. Remove the seat by rocking it slightly toward the

rear of the vehicle and then pulling it out. This
should be done in one motion.

Summary of Contents for VENTURE 1999

























































































































































































































































































































































































































































Search results

Summary of Contents for VENTURE 1999

Reviews:

Related manuals for VENTURE 1999

Brands by name

Popular brands

Chevrolet VENTURE 1999, Owner'S Manual

Search results

Summary of Contents for VENTURE 1999

Reviews:

Related manuals for VENTURE 1999

Brands by name

Popular brands