18
SETTING CRUISE CONTROL
Press the
On/Off button. The Cruise
Control symbol will illuminate in white on the
instrument cluster.
When traveling at the desired speed, press
the switch down to the SET– position to set
the speed. The symbol will illuminate in
green on the instrument cluster.
ADJUSTING CRUISE CONTROL
RES+ Resume/Accelerate
Press up to resume a set speed. When active, press up to increase speed.
SET– Set/Coast
When active, press down to decrease speed.
Cancel
Press the
button, or press the brake pedal, to cancel the Cruise Control without
erasing the set speed from memory.
The set speed is erased when Cruise Control or the vehicle ignition is turned off.
ADAPTIVE CRUISE CONTROL–CAMERA
F
The system enhances regular Cruise Control to maintain a following gap — the time
between your vehicle and a vehicle detected directly ahead — by accelerating or braking
automatically while you continue to steer.
Press the
Following Gap button to select a gap setting of Far, Medium or Near.
This is also the Forward Collision Alert setting.
Press and hold the
Cancel button to switch between regular Cruise Control and
Adaptive Cruise Control.
CRUISE CONTROL
F
See Driving and Operating in your Owner’s Manual.
Manual mode allows you to choose the top gear
limit. It can be used to limit the vehicle’s speed
when driving downhill or towing a trailer.
1. Move the shift lever to L (Low).
2. Press the + (plus) or – (minus) button on the
shift lever to increase or decrease the gear
range available. The current gear will be
displayed on the Driver Information Center.
If vehicle speed is too high or low for the
requested gear, the shift will not occur.
AUTOMATIC TRANSMISSION MANUAL MODE
See Driving and Operating in your Owner’s Manual.
F
Optional equipment
