Chevrolet Spark 2022 Owner'S Manual Download Page 89

Page: 89 / 200

Chevrolet Spark Owner Manual (GMK-Localizing-Israel-15672694) - 2022 -

CRC - 3/17/21

Lighting

On vehicles with light sensor the brightness
can only be adjusted when the exterior
lights are on and the light sensor detects
night conditions.

Interior Lamps

During entry and exit of the vehicle, the
front courtesy lights automatically switch on
and then off after a delay.

Note

In the event of an accident with airbag
deployment the courtesy lights are turned
on automatically. When the switch is in the

position.

Front courtesy light

Operate rocker switch:

: Automatic switching on when opening

a door.

Press

: On

Press

: Off

Reading lights

Operated with buttons in front courtesy
lights.

Lighting Features

Center Console Lighting

Spotlight incorporated in the interior lighting
comes on when the low beam is
switched on.

Summary of Contents for Spark 2022









































































































































































































Search results

Summary of Contents for Spark 2022

Reviews:

Related manuals for Spark 2022

Brands by name

Popular brands

Chevrolet Spark 2022, Owner'S Manual

Search results

Summary of Contents for Spark 2022

Reviews:

Related manuals for Spark 2022

Brands by name

Popular brands