Chevrolet Spark 2022 Owner'S Manual Download Page 15

Page: 15 / 200

Chevrolet Spark Owner Manual (GMK-Localizing-Israel-15672694) - 2022 -

CRC - 3/17/21

Keys, Doors, and Windows

Manual Mirrors

If equipped, move the control up, down,
or side to side to adjust the mirror.

Adjust the mirrors so the side and the area
behind the vehicle can be seen.

Power Mirrors

Select the relevant exterior mirror by
turning the control to left (L) or right (R).
Then swivel the control to adjust the mirror.

In position 0 no mirror is selected.

Folding Mirrors

For pedestrian safety, the exterior mirrors
will swing out of their normal mounting
position if they are struck with sufficient
force. Reposition the mirror by applying
slight pressure to the mirror housing.

Summary of Contents for Spark 2022









































































































































































































Search results

Summary of Contents for Spark 2022

Reviews:

Related manuals for Spark 2022

Brands by name

Popular brands

Chevrolet Spark 2022, Owner'S Manual

Search results

Summary of Contents for Spark 2022

Reviews:

Related manuals for Spark 2022

Brands by name

Popular brands