Chevrolet Spark Owner Manual (GMNA-Localizing-U.S./Canada-14622955) -
2021 - CRC - 8/17/20
Keys, Doors, and Windows
23
Warning (Continued)
damaged. Before using automatic reversal
system override, make sure that all
people and obstructions are clear of the
window path.
When the engine is on, override the
automatic reversal system by pulling and
holding the window switch if conditions
prevent it from closing.
Programming the Power Windows
Programming may be necessary if the
vehicle battery has been disconnected or
discharged. If the window is unable to
express-up, program each express-close
window:
1. Close all doors.
2. Turn the ignition on or to ACC/
ACCESSORY.
3. Partially open the window to be
programmed. Then close it and continue
to pull the switch briefly after the
window has fully closed.
4. Open the window and continue to press
the switch briefly after the window has
fully opened.
Sun Visors
Pull the sun visor down to block out glare.
Detach the sun visor from the center mount
and swing it to the side.
Visor Vanity Mirror
The vehicle may have vanity mirrors and
card holders on the back of the sun visors.
Swing down the sun visor to expose the
vanity mirror.
Roof
Sunroof
If equipped, the ignition must be on or in
ACC/ACCESSORY, or Retained Accessory
Power (RAP) must be active to operate the
sunroof. See
or
Ignition Positions (Key Access)
and
Retained Accessory Power (RAP)
.
Express-Vent/Open :
Press and release
e
(1) to express-vent. Press and release
e
(1)
again to express-open the sunroof. Press the
switch again to stop movement. The
sunshade automatically opens with the
sunroof, but must be closed manually.
Vent/Open :
Press and hold
e
(1) to vent.
Press and hold
e
(1) again to open the
sunroof. Release the switch to stop
movement. The sunshade automatically
opens with the sunroof, but must be closed
manually.
Close :
Press and hold
g
(2) to close.
Release the switch to stop movement.