![Chevrolet SILVERADO 1500 2022 Manual Download Page 6](http://html.mh-extra.com/html/chevrolet/silverado-1500-2022/silverado-1500-2022_manual_2597604006.webp)
6
SET MEMORY POSITIONS
1. With the vehicle in Park, adjust the driver’s seat and power outside mirrors
F
.
2. Press and release the
SET button on the driver’s door. A beep will sound.
3. Immediately press and hold button
1 or 2 until two beeps sound. Use the button that
matches the Driver Information Center welcome message indicating driver 1 or 2
(key fob 1 or 2).
To store a seat position for more clearance when exiting the vehicle, repeat these steps
using the
Exit button instead of button 1 or 2.
RECALL MEMORY POSITIONS
Press and hold button 1 or 2 or
Exit
until the set position is reached.
To enable the memory positions to be
recalled automatically when the ignition
is turned on/off (for exit recall, the
driver’s door must be opened), go to
Settings > Vehicle > Seating Position >
Seat Entry Memory and Seat Exit
Memory.
POWER FRONT SEATS
F
See Seats and Restraints in your Owner’s Manual.
ELECTRONIC PRECISION SHIFT TRANSMISSION
F
The electronic transmission shift lever
always starts in a center position. The
selected gear position illuminates in red.
After shifting, the shift lever returns to the
center position.
Park – Press the P button (A) on the top of
the lever to shift into Park. To shift out of
Park, press the brake pedal and then press
and hold the shift lock button (B) while
selecting the desired gear.
Reverse – Press the brake pedal and then press and hold the shift lock button (B) on the
side of the lever while moving the lever forward completely, past the detent, to shift into
Reverse.
Neutral – Move the lever forward (to the detent) to shift into Neutral.
Note: The vehicle will not stay in Neutral for an extended period. It will automatically shift into Park.
Drive – Move the lever rearward to shift into Drive.
Low – With the transmission in Drive, move the lever rearward to shift into Low. Pull the
left (-) paddle on the back of the steering wheel to downshift and the right (+) paddle to
upshift. If engine speed is too high or low for the requested gear, the shift will not occur.
Move the lever rearward again to return to Drive.
See Driving and Operating in your Owner’s Manual.
F
Optional equipment Some equipment shown may not be included in your vehicle.
A
B