Chevrolet Equinox Fuel Cell, Owner'S Manual

Page: 148 / 252

TRACTION CONTROL ON
This message displays when the Traction Control
System (TCS) turns on. See
Traction Control System
(TCS) on page 4-5 for more information.
TURN KEY TO START
This message displays when the fuel cell system is
ready to start. Turn the key to start the vehicle.
TURN SIGNAL ON
This message displays as a reminder to turn off the turn
signal if you drive your vehicle for more than about
0.75 mile (1.2 km) with a turn signal on. See
Turn
Signal/Multifunction Lever on page 3-7 .
This message displays and a chime sounds only when
the vehicle is on. The message will not disappear until the
turn signal is manually turned off, or a turn is completed.
DIC Vehicle Personalization
Your vehicle has personalization capabilities that allow
you to program certain features to one preferred
setting.
Only the options available will be displayed on the DIC.
The default settings for the personalization features were
set when your vehicle left the factory, but may have been
changed from their default state since then.
To change personalization preferences, use the
following procedure.
Entering the Feature Settings Menu
1. Turn the vehicle on and place the shift lever
in PARK (P).
To avoid excessive drain on the battery, it is
recommended that the headlamps are turned off.
2. Press the vehicle information button until FEATURE
SETTNGS (Settings): PRESS
V
TO SELCT
(Select) appears on the DIC display.
3. Press the set/reset button to enter the feature
settings menu.
If the menu is not available, FEATURE SETTNGS
(Settings): AVAILABLE IN PRK (Park) will
display. Before entering the menu, make sure the
vehicle is in PARK (P).
3-48