Chevrolet Colorado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
11349743) - 2018 - crc - 10/12/17
Infotainment System
177
3. Say each digit, one at a time.
After each digit is entered, the
system repeats back the digit it
heard followed by a tone. After
the last digit has been entered,
say
“
Dial.
”
Once connected, the person called
will be heard through the audio
speakers.
Using the
“
Re-dial
”
Command
1. Press
g
. The system responds
“
Ready,
”
followed by a tone.
2. After the tone, say
“
Re-dial.
”
The system dials the last
number called from the
connected cell phone.
Once connected, the person called
will be heard through the audio
speakers.
Receiving a Call
When an incoming call is received,
the audio system mutes and a ring
tone is heard in the vehicle.
.
Press
g
to answer the call.
.
Press
i
to ignore a call.
Call Waiting
Call waiting must be supported on
the cell phone and enabled by the
wireless service carrier.
.
Press
g
to answer an incoming
call when another call is active.
The original call is placed
on hold.
.
Press
g
again to return to the
original call.
.
To ignore the incoming call, no
action is required.
.
Press
i
to disconnect the
current call and switch to the call
on hold.
Three-Way Calling
Three-way calling must be
supported on the cell phone and
enabled by the wireless service
carrier.
1. While on a call, press
g
.
2. Say
“
Three-way call.
”
3. Use the
“
Dial
”
or
“
Call
”
command to dial the number of
the third party to be called.
4. Once the call is connected,
press
g
to link all callers
together.
Ending a Call
Press
i
to end a call.
Transferring a Call
Audio can be transferred between
the Bluetooth system and the cell
phone.
The cell phone must be paired and
connected with the Bluetooth
system before a call can be
transferred. The connection process
can take up to two minutes after the
ignition is turned on.
To Transfer Audio from the
Bluetooth System to a Cell Phone
During a call with the audio in the
vehicle:
1. Press
g
.
2. Say
“
Transfer Call.
”