Chevrolet Captiva Owner Manual (GMNA-Localizing-MidEast LHD-
14860584) - 2021 - CRC - 5/18/20
118
Driving and Operating
When the ignition switch is turned at the
right side of the steering column, the
operating positions are as follows:
.
LOCK
Lock the steering wheel. Remove the key
and turn the steering wheel until it is
locked.
If you cannot turn the key when
unlocking the steering wheel, gently turn
the steering wheel right/left and turn
the key.
.
ACC
The engine can be shut down when the
ignition key is turned to the ACC position
without the need to lock the steering
wheel. If you turn the ignition key from
the ACC position to the LOCK position,
you can gently press in the key and turn
the key to the LOCK position.
When the ignition key is at the ACC
position, some electrical accessories such
as the radio and cigar lighter can be used.
.
ON
Connect the ignition system and electrical
accessories.
Do not keep the key in the ACC or ON
position for a long time when the engine
is out of operation; otherwise the battery
will have insufficient voltage.
.
START
Start the engine. After starting the
engine, release the key; the key will
automatically return to the ON position.
Confirm that the engine does not operate
before turning the ignition key to the
START position.
Caution
Never remove the key or turn the key in
the ignition while driving. Otherwise, the
driver would lose control of the vehicle
and the brake assistance will not function
properly, which can cause vehicle damage
and injury or death.
Ignition Positions (Keyless Access)
If equipped, the ENGINE START STOP switch
is at the lower right side of the instrument
panel.
Working indicator on ENGINE START STOP
switch:
I
Orange: indicates that the ignition
switch is at the ACC or ON position.
I
Green: indicates that the start
conditions are met.
When the working indicator turns green,
if the transmission is in Neutral , press the
start switch and then the engine can be
started.