Black plate (29,1)
Chevrolet Caprice Police Patrol Vehicle (GMNA-Localizing-U.S.-6067651) -
2014 - crc - 8/22/13
Infotainment System
7-29
See
.
Bluetooth Audio
See
.
Pairing with Infotainment
Controls
A Bluetooth-enabled mobile phone
must be paired and then connected
to the vehicle before it can be used.
See your mobile phone
manufacturer's user guide for
Bluetooth functions before pairing
the mobile phone.
Pairing Information
.
A Bluetooth-enabled phone and
an audio playback device can be
paired to the system at the
same time.
.
Up to five devices can be paired
to the Bluetooth system.
.
The pairing process is disabled
when the vehicle is moving.
.
Pairing only needs to be
completed once, unless the
pairing information on the mobile
phone changes or the mobile
phone is deleted from the
system.
.
Only one paired mobile phone
can be connected to the
Bluetooth system at a time.
.
If multiple paired mobile phones
are within range of the system,
the radio will connect to the first
phone in the list or to the phone
that was previously connected.
Pairing a Phone/Device
1. Press CONFIG or Press Config
on the Home Page or press
v
/
>
.
2. Select Phone Settings.
3. Select Bluetooth.
4. Select Pair Device. The
infotainment system displays
“
Pairing Code: XXXX
”
. Confirm
or enter number:
”
If the device
supports a four-digit Personal
Identification Number (PIN), it
will display. The PIN is used in
Step 6.
5. Start the pairing process on the
mobile phone to be paired to the
vehicle. See the mobile phone
manufacturer's user guide.
6. Locate and select the device
named Mylink in the list on the
mobile phone. Follow the
instructions on the mobile phone
to enter the PIN provided in
Step 4, or to confirm the six-digit
code matches. The system
recognizes the new connected
phone after the pairing process
is complete.
7. If the phone prompts to accept
connection or allow phone book
download, select always accept
and allow. The phone book may
not be available if not accepted.
Some phones will put
connection request or
phonebook request in a pull
down task bar at the top of the