Chevrolet Camaro High Performance Owner Manual Supplemen (GMNA-
Localizing-U.S./Canada/Mexico-11348335) - 2018 - crc - 10/17/17
20
Driving and Operating
Adjustable Rear Stabilizer Bar
(ZL1 1LE Only)
The rear stabilizer bar ends have
three attachment positions that
allow the rear roll stiffness of the
vehicle to be adjusted.
The stabilizer bar stiffness
increases approximately 15% using
the rearward holes, or decreases
approximately 10% using the
forward holes.
To change the attachment position:
1. Raise and support the rear of
the vehicle.
2. Remove the stabilizer bar link
nut while holding the ball
stud end.
3. Reposition the stabilizer bar
link stud to the desired hole
and tighten to 43
Y
(32 lb ft).
Use the same hole position for
both sides of the vehicle.
Wheel Alignment
Track alignment specifications are
for vehicle at curb weight conditions
(full tank of fuel, zero ballast).
Racing and competitive driving
wheel alignment settings can be set
as follows for increased handling
performance: