5
Starting the Vehicle/ON
With the vehicle in Park or Neutral, press
the brake pedal and then press the
POWER
button. A power ON audio cue
will sound.
The vehicle will not shift out of Park and a
Charge Cord Connected message will display
if the vehicle is still plugged in.
When ON, the instrument cluster will display
an active battery.
Stopping the Vehicle/OFF
Shift to Park and then press the
POWER
button. A power OFF audio cue will sound.
Pedestrian Safety Signal
The vehicle is equipped with an automatic sound generator. The sound is automatically
generated at speeds below 14 mph to indicate the vehicle’s presence to pedestrians.
See Driving and Operating in your Owner Manual.
Getting Started
POWER Button
The Bolt EV features an electronic push-button start. The
POWER
button flashes when
the driver’s door is opened upon entry. Once the vehicle is ON, the button illuminates.
Note:
The air conditioning compressor, pumps and fan may run at any time — even when the vehicle is
OFF — to cool or warm the propulsion battery.
Driver’s Seat and Steering Wheel Adjustment
Before driving, adjust the steering wheel and seat
to a comfortable position.
Pull down the lever (A) to unlock the steering
wheel and adjust its position.
Lift the handle (B) under the right-front side of
the seat to slide the seat forward or rearward.
Ratchet the side lever (C) up or down to raise or
lower the seat.
Lift the rear lever (D) to adjust the seatback.
See Seats and Restraints in your Owner Manual.
A
C
B
D