Black plate (41,1)
Chevrolet TRAX Owner Manual (GMNA-Localizing-Canada/Mexico-
6014783) - 2014 - CRC - 9/23/13
Infotainment System
7-41
3. Say
“
911.
”
4. Say
“
Dial
”
or
“
Call.
”
Using the
“
Digit Dial
”
Command
The digit dial command allows a
phone number to be dialed by
entering the digits one at a time.
After each digit is entered, the
system repeats back the digit it
heard followed by a tone.
If an unwanted number is
recognized by the system, say
“
Clear
”
at any time to clear the last
number.
To hear all of the numbers
recognized by the system, say
“
Verify
”
at any time.
1. Press
b
/
g
. The system
responds
“
Ready,
”
followed by
a tone.
2. Say
“
Digit Dial.
”
3. Say each digit, one at a time,
that you want to dial. After each
digit is entered, the system
repeats back the digit it heard
followed by a tone. After the last
digit has been entered,
say
“
Dial.
”
Once connected, the person called
will be heard through the audio
speakers.
Using the
“
Re-dial
”
Command
1. Press
b
/
g
. The system
responds
“
Ready,
”
followed by
a tone.
2. After the tone, say
“
Re-dial.
”
The
system dials the last number
called from the connected cell
phone.
Once connected, the person called
will be heard through the audio
speakers.
Receiving a Call
When an incoming call is received,
the audio system mutes and a ring
tone is heard in the vehicle.
.
Press
b
/
g
to answer the call.
.
Press
$
/
i
to ignore a call.
Call Waiting
Call waiting must be supported on
the cell phone and enabled by the
wireless service carrier.
.
Press
b
/
g
to answer an
incoming call when another call
is active. The original call is
placed on hold.
.
Press
b
/
g
again to return to
the original call.
.
To ignore the incoming call, no
action is required.
.
Press
$
/
i
to disconnect the
current call and switch to the call
on hold.
Three-Way Calling (If
Equipped)
Three-way calling must be
supported on the cell phone and
enabled by the wireless service
carrier.
1. While on a call, press
b
/
g
.
2. Say
“
Three-way call.
”
