Chevrolet 2013 Malibu Owner'S Manual Download Page 242 | Manualshive

Page: 242 / 436

background image

Black plate (26,1)

Chevrolet Malibu Owner Manual - 2013 - CRC - 6/6/12

9-26

Driving and Operating

Automatic
Transmission

P (Park):

This position locks the

front wheels. It is the best position
to use when you start the engine
because the vehicle cannot move
easily.

{

WARNING

It is dangerous to get out of the
vehicle if the shift lever is not fully
in P (Park) with the parking brake
firmly set. The vehicle can roll.

Do not leave the vehicle when the
engine is running. If you have left
the engine running, the vehicle
can move suddenly. You or others
could be injured. To be sure the
vehicle will not move, even when
you are on fairly level ground,
always set the parking brake and
move the shift lever to P (Park).
See

Shifting Into Park on

Make sure the shift lever is fully in
P (Park) before starting the engine.
The vehicle has an automatic
transmission shift lock control
system. You must fully apply the
brake pedal then press the shift
lever button before you can shift
from P (Park) while the ignition key

is in ON/RUN. If you cannot shift out
of P (Park), ease pressure on the
shift lever and push the shift lever
all the way into P (Park) as you
maintain brake application. Then
move the shift lever into another
gear. See

Shifting out of Park on

.

R (Reverse):

Use this gear to

back up.

Notice:

Shifting to R (Reverse)

while the vehicle is moving
forward could damage the
transmission. The repairs would
not be covered by the vehicle
warranty. Shift to R (Reverse) only
after the vehicle is stopped.

To rock the vehicle back and forth to
get out of snow, ice, or sand without
damaging the transmission, see

the Vehicle Is Stuck on page 9

N (Neutral):

In this position, the

engine does not connect with the
wheels. To restart the engine when
the vehicle is already moving, use
N (Neutral) only.

«
...
240
241
242
243
244
...
»

Summary of Contents for 2013 Malibu





















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2013 Malibu

Brand: TBC Pages: 12

Brand: Edelbrock Pages: 1

Brand: FORM FIT Pages: 2

Brand: StowAway 2 Pages: 2

Brand: Saab Pages: 12

Brand: Jaeger Pages: 11

Brand: AL-KO Pages: 40

Brand: BraunAbility Pages: 46

Brand: GYS Pages: 32

80-485-142401-RT

Brand: Classic Accessories Pages: 14

MULTI VEHICLE MOUNT MVM-45-05

Brand: Bracketron Pages: 4

Brand: TOP VEHICLE TECH Pages: 8

Brand: SEC Pages: 2

Brand: Alu-Cab Pages: 6

1991 CAMRY Body Section

Brand: Toyota Pages: 111

Brand: Chrysler Pages: 6

2014 Accord Coupe EX-L

Brand: Honda Pages: 22

Brand: Thule Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands