Chevrolet 2011 Traverse, Owner'S Manual

Page: 215 / 452

Black plate (25,1)
Chevrolet Traverse Owner Manual - 2011
Infotainment System 7-25
Connecting a USB Storage
Device or iPod
®
A. USB Port
To connect a USB storage device,
connect the device to the USB port
located in the instrument panel
storage area. See
Instrument Panel
Storage on page 4 ‑ 1 for more
information.
The USB Port can be used to
control an iPod or a USB storage
device.
To connect an iPod, connect one
end of the USB cable that came
with the iPod to the iPod
’ s dock
connector and connect the other
end to the USB port located in the
center console. If the vehicle is on
and the USB connection works,
“ OK
to disconnect ” and a GM logo may
appear on the iPod and iPod
appears on the radio's display. The
iPod music appears on the radio
’ s
display and begins playing.
The iPod charges while it is
connected to the vehicle if the
vehicle is in the ACC/ACCESSORY
or ON/RUN position. When the
vehicle is turned off, the iPod
automatically powers off and will not
charge or draw power from the
vehicle's battery.
If you have an older iPod model that
is not supported, it can still be used
by connecting it to the Auxiliary
Input Jack using a standard 3.5 mm
(1/8 in) stereo cable. See
“ Using the
Auxiliary Input Jack ” earlier for more
information.
Using the Radio to Control a
USB Storage Device or iPod
The radio can control a USB
storage device or an iPod using the
radio buttons and knobs and display
song information on the radio
’ s
display.
f
(Tune): Turn to select files.
©
SEEK: Press to go to the start of
the track, if more than ten seconds
have played. Press and hold or
press multiple times to continue
moving backward through tracks.
¨
SEEK: Press to go to the next
track. Press and hold or press
multiple times to continue moving
forward through tracks.
s
REV (Reverse): Press and hold
to reverse playback quickly. Sound
is heard at a reduced volume.
Release
s
REV to resume playing.
The elapsed time of the file
displays.