Chevrolet 2011 Colorado Crew Cab Owner'S Manual Download Page 27

Page: 27 / 394

Black plate (3,1)

Chevrolet Colorado Owner Manual - 2011

Keys, Doors and Windows

2-3

Remote Keyless Entry
(RKE) System

See

Radio Frequency Statement on

page 13

‑

for information

regarding Part 15 of the Federal
Communications Commission (FCC)
rules and Industry Canada
Standards RSS-210/220/310.

If there is a decrease in the RKE
operating range:

Check the distance. The
transmitter may be too far
from the vehicle.

Check the location. Other
vehicles or objects may be
blocking the signal.

Check the transmitter's battery.
See

“

Battery Replacement

”

later

in this section.

If the transmitter is still not
working correctly, see your
dealer or a qualified technician
for service.

Remote Keyless Entry
(RKE) System Operation

Vehicles with Remote Keyless
Entry (RKE), transmitter functions
work up to 9 m (30 ft) away from
the vehicle.

There are other conditions which
can affect the performance of the
transmitter. See

Remote Keyless

Entry (RKE) System on page 2

‑

UNLOCK:

Press to unlock the

driver door and turn on the interior
lamps. The parking lamps may flash
and the horn may sound.

Press UNLOCK again within
three seconds and all of the doors
unlock.

LOCK:

Press to lock all the doors.

The parking lamps may flash and
the horn may sound.

Summary of Contents for 2011 Colorado Crew Cab











































































































































































































































































































































































































Search results

Summary of Contents for 2011 Colorado Crew Cab

Reviews:

Brands by name

Popular brands

Chevrolet 2011 Colorado Crew Cab, Owner'S Manual

Search results

Summary of Contents for 2011 Colorado Crew Cab

Reviews:

Brands by name

Popular brands