Home
/
Chevrolet
/
2010 Malibu
/
Owner'S Manual

Chevrolet 2010 Malibu, Owner'S Manual, Page: 129 / 451

Share

Page: 129 / 451

Chevrolet 2010 Malibu Owner'S Manual Download Page 129

It may be possible for the PASS-Key

®

III+ decoder to

“learn” the transponder value of a new or replacement
key. Up to 10 keys may be programmed for the vehicle.
The following procedure is for programming additional
keys only. If all the currently programmed keys are
lost or do not operate, you must see your dealer/retailer
or a locksmith who can service PASS-Key

®

III+ to

have keys made and programmed to the system.

See your dealer/retailer or a locksmith who can service
PASS-Key

®

III+ to get a new key blank that is cut

exactly as the ignition key that operates the system.

To program the new key:

1. Verify that the new key has a

1

stamped on it.

2. Insert the already programmed key in the ignition

and start the engine. If the engine will not start,
see your dealer/retailer for service.

3. After the engine has started, turn the key to

LOCK/OFF, and remove the key.

4. Insert the key to be programmed and turn it to the

ON/RUN position within five seconds of the original
key being turned to the LOCK/OFF position.

The security light will turn off once the key has
been programmed.

5. Repeat Steps 1 through 4 if additional keys are to

be programmed.

If you are ever driving and the security light comes on
and stays on, you may be able to restart your engine if
you turn it off. Your PASS-Key

®

III+ system, however,

is not working properly and must be serviced by
your dealer/retailer. Your vehicle is not protected by the
PASS-Key

®

III+ system at this time.

If the PASS-Key

®

III+ key is lost or damaged, see your

dealer/retailer or a locksmith who can service
PASS-Key

®

III+ to have a new key made.

Do not leave the key or device that disarms or
deactivates the theft deterrent system in the vehicle.

3-21

«
...
127
128
129
130
131
...
»

Summary of Contents for 2010 Malibu




































































































































































































































































































































































































































































Reviews:

No comments