Chevrolet 2009 Equinox Owner'S Manual Download Page 32

Page: 32 / 446

There is one guide for each outside passenger position
in the rear seat. Here is how to install a comfort
guide to the safety belt:

1. Remove the guide from its storage clip on the back

of the seatback.

2. Place the guide over the belt, and insert the two

edges of the belt into the slots of the guide.

3. Be sure that the belt is not twisted and it lies flat.

The elastic cord must be under the belt and the
guide on top.

1-28

Summary of Contents for 2009 Equinox































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 Equinox

Reviews:

Brands by name

Popular brands

Chevrolet 2009 Equinox, Owner'S Manual

Search results

Summary of Contents for 2009 Equinox

Reviews:

Brands by name

Popular brands