2009 Chevrolet Aveo
|
Aveo, Wave, G3, Barina (VIN S/T) Service Manual
|
Engine
|
Engine Controls and Fuel - 1.6L (LXT)
|
Repair Instructions
|
Document ID: 1685961
Idle Learn
The Idle Learn Procedure listed below must be performed whenever the following occurs:
1. Turn the ignition ON.
2. Turn the ignition OFF for 15 seconds.
3. Turn the ignition ON for 5 seconds.
4. Turn the ignition OFF for 15 seconds.
5. Start the engine in park/neutral.
6. Allow the engine to run until the engine coolant temperature is greater than 85°C (185°F).
7. Turn the A/C ON for 10 seconds, if equipped.
8. If the vehicle is equipped with an automatic transaxle, apply the parking brake. While
pressing the brake pedal, place the transaxle in drive (D) for 10 seconds.
9. Turn the A/C OFF for 10 seconds, if equipped.
10. If the vehicle is equipped with an automatic transaxle, while pressing the brake pedal, place
the transaxle in park/neutral.
11. Turn the ignition OFF. The idle learn procedure is complete.
• The throttle body assembly is replaced
• The throttle body is cleaned
• The engine control module (ECM) is replaced
• The idle air control valve (IAC) is replaced
• Power disconnection (battery cable, ECM fuse, etc.) (Delphi ECM only)
© 2010 General Motors Corporation. All rights reserved.
Page 1 of 1
Document ID: 1685961
7/5/2010
http://localhost:9001/si/showDoc.do?docSyskey=1685961&pubCellSyskey=138520&pubO...
