Chevrolet 2008 Corvette Navigation System Owner'S Manual Download Page 7

Page: 7 / 432

Power Seats

To adjust a power seat:

•

Move the control forward or rearward to adjust the
seat forward or rearward.

•

Move the front or rear of the control up or down to
adjust the height of the seat cushion.

Your seat position can be stored and recalled if you
have the memory option. See Memory Seat, Mirrors
and Steering Wheel on page 1-4.

Power Lumbar and Side Bolsters

On vehicles with power lumbar and side bolsters:

Move (A) forward or rearward to adjust lumbar support.

Move (B) up or down to adjust the side bolsters.

1-3

Summary of Contents for 2008 Corvette Navigation System

















































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Corvette Navigation System

Reviews:

Related manuals for 2008 Corvette Navigation System

Brands by name

Popular brands

Chevrolet 2008 Corvette Navigation System, Owner'S Manual

Search results

Summary of Contents for 2008 Corvette Navigation System

Reviews:

Related manuals for 2008 Corvette Navigation System

Brands by name

Popular brands