Chevrolet 2007 Equinox Owner'S Manual Download Page 407

Page: 407 / 492

5. Remove the

wing-bolt holding
the jack and
then remove it.

6. Remove the hook and loop fastener straps

holding the bag containing the wheel wrench.
Remove the wheel wrench from the bag.

7. Extend the socket portion of the wrench from

the handle.

Removing the Flat Tire and
Installing the Spare Tire

You must take off the wheel cover or center cap,
if the vehicle has one, to reach the wheel bolts.

1. Loosen all

five plastic caps
by turning the
wheel wrench
counterclockwise.
Do not try to remove
plastic caps from
the cover or
center cap.

2. Pull the cover or center cap away from

the wheel.

3. Use the wheel wrench to loosen all the wheel

nuts. Do not remove them yet.

4. Attach the wheel wrench to the jack bolt

head and turn the wheel wrench clockwise.
That will raise the lift head a little.

407

Summary of Contents for 2007 Equinox













































































































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Equinox

Reviews:

Brands by name

Popular brands

Chevrolet 2007 Equinox, Owner'S Manual

Search results

Summary of Contents for 2007 Equinox

Reviews:

Brands by name

Popular brands