Chevrolet 2006 Epica Owner'S Manual Download Page 173

Page: 173 / 368

Radio with Six-Disc CD
(Double Display, MP3/WMA)

Playing the Radio

(Power/Volume):

Press and release this knob to

turn the system on and off.

Turn the power/volume knob clockwise or
counterclockwise to increase or decrease the volume.

Press this button for longer than two seconds to
mute the system.

Finding a Station

AM:

Press this button to switch to an AM station.

The display will show the selection.

FM:

Press this button to switch to an FM station.

The display will show the selection.

( )

TUNE:

Press this button to select radio

stations.

Press the up arrows to increase or the down arrows to
decrease the radio frequencies.

¦ ¥

SEEK:

Press this button to seek radio stations.

Press the up arrows to seek the next radio station
or the down arrows to seek the previous radio station.

SCAN/AST:

Press this button to scan radio stations.

The radio will go to a station, play for a few seconds,
then go on to the next station. Press this button again
to stop scanning.

The radio will only scan stations with a strong signal
that are in the selected band.

3-67

Summary of Contents for 2006 Epica

















































































































































































































































































































































































Search results

Summary of Contents for 2006 Epica

Reviews:

Related manuals for 2006 Epica

Brands by name

Popular brands

Chevrolet 2006 Epica, Owner'S Manual

Search results

Summary of Contents for 2006 Epica

Reviews:

Related manuals for 2006 Epica

Brands by name

Popular brands